China · Shenzhen · Headquarters
Address: 301A, Building B, No. 10 Tongfu Road, Tangxiayong, Yanluo Street, Baoan District, Shenzhen
![]() |
---specification
Area: 0.35㎡
Weight: 20kg
Height: 1.45m
Width: 350mm
---Technical Parameters
Pressure ratio: 1: 1
Wetted parts: stainless steel / aluminum alloy
Paint pressure: 8 bar, 116PSI
Maximum air pressure: 8 bar, 116PSI
PFSⅢ paint supply system integrates storage, circulation, filtration, and voltage stabilization functions. Independent research and development for our company, has applied for a patent, counterfeiting will be investigated!
The main components:
1. Pneumatic diaphragm pump;
2. Automatic lifting bracket;
3. Pneumatic mixer;
4. Paint pressure regulating valve;
5. Back pressure valve.
Functions and limits:
1. Wide range of application: stains, primers and fuels, overcoat varnishes, solvent-based and water-based coatings, two-component coatings, high-solid materials industry, paints, metal paints, special-effect coatings, glues, adhesives;
2. It is not necessary to use the paint pressure regulating valve as in the traditional pump to realize the flow of non-veined animal material, thereby forming a uniform spray pattern;
3. The parts in contact with the material are made exclusively of stainless steel;
4. Low pump volume can significantly reduce waste and solvent consumption;
5. The double-layer PTFE Teflon diaphragm has a long life and is super wear-resistant, which can ensure that the high-speed operation of the pump can reach the high-performance standard for a long time without any damage;
6. Fewer consumable parts, no sealing parts need to be replaced regularly.
Application scenario:
This paint supply system is used not only for spraying operations, but also for fluid transfer applications such as:
1. Convey paint and solvents;
2. Circulating conveying of flexographic ink;
3. Fill chemical products;
4. Fill / empty storage tank / barrel;
5, circulating low-viscosity fluid;
6. Waste liquid discharge.
Application industry:
1.Wood and furniture industry
2.General conventional metal industry
3. Plastic surface spraying
4.Leather and textile applications
5.Glass spraying
---specification
Area: 0.35㎡
Weight: 20kg
Height: 1.45m
Width: 350mm
---Technical Parameters
Pressure ratio: 1: 1
Wetted parts: stainless steel / aluminum alloy
Paint pressure: 8 bar, 116PSI
Maximum air pressure: 8 bar, 116PSI